当前位置：
首页
/
技术资料
/
ASME-Y14.5-2009
ASME-Y14.5-2009
技术资料目录
ASME-Y14.5-2009
目录
FOREWORD
COMMITTEE ROSTER
CORRESPONDENCE WITH THE Y14 COMMITTEE
Section 1 Scope, Definitions, and General Dimensioning
1.1 SCOPE
1.2 REFERENCES
1.3 DEFINITIONS
1.4 FUNDAMENTAL RULES
1.5 UNITS OF MEASURE
1.6 TYPES OF DIMENSIONING
1.7 APPLICATION OF DIMENSIONS
1.8 DIMENSIONING FEATURES
1.9 LOCATION OF FEATURES
Section 2 General Tolerancing and Related Principles
2.1 GENERAL
2.2 DIRECT TOLERANCING METHODS
2.3 TOLERANCE EXPRESSION
2.4 INTERPRETATION OF LIMITS
2.5 SINGLE LIMITS
2.6 TOLERANCE ACCUMULATION
2.7 LIMITS OF SIZE
2.8 APPLICABILITY OF MODIFIERS ON GEOMETRIC TOLERANCE VALUES AND DATUM FEATURE REFERENCES
2.9 SCREW THREADS
2.10 GEARS AND SPLINES
2.11 BOUNDARY CONDITIONS
2.12 ANGULAR SURFACES
2.13 CONICAL TAPERS
2.14 FLAT TAPERS
2.15 RADIUS
2.16 TANGENT PLANE
2.17 STATISTICAL TOLERANCING
Section 3 Symbology
3.1 GENERAL
3.2 USE OF NOTES TO SUPPLEMENT SYMBOLS
3.3 SYMBOL CONSTRUCTION
3.4 FEATURE CONTROL FRAME SYMBOLS
3.5 FEATURE CONTROL FRAME PLACEMENT
3.6 DEFINITION OF THE TOLERANCE ZONE
3.7 TABULATED TOLERANCES
Section 4 Datum Reference Frames
4.1 GENERAL
4.2 DEGREES OF FREEDOM
4.3 DEGREES OF FREEDOM CONSTRAINED BY PRIMARY DATUM FEATURES REGARDLESS OF MATERIAL BOUNDARY
4.4 CONSTRAINING DEGREES OF FREEDOM OF A PART
4.5 DATUM FEATURE SIMULATOR
4.6 THEORETICAL AND PHYSICAL APPLICATION OF DATUM FEATURE SIMULATORS
4.7 DATUM REFERENCE FRAME
4.8 DATUM FEATURES
4.9 DATUM FEATURE CONTROLS
4.11 ESTABLISHING DATUMS
4.12 MULTIPLE DATUM FEATURES
4.13 MATHEMATICALLY DEFINED SURFACE
4.14 MULTIPLE DATUM REFERENCE FRAMES
4.15 FUNCTIONAL DATUM FEATURES
4.16 ROTATIONAL CONSTRAINT ABOUT A DATUM AXIS OR POINT
4.17 APPLICATION OF MMB, LMB, AND RMB TO IRREGULAR FEATURES OF SIZE
4.18 DATUM FEATURE SELECTION PRACTICAL APPLICATION
4.19 SIMULTANEOUS REQUIREMENTS
4.20 RESTRAINED CONDITION
4.21 DATUM REFERENCE FRAME IDENTIFICATION
4.22 CUSTOMIZED DATUM REFERENCE FRAME CONSTRUCTION
4.23 APPLICATION OF A CUSTOMIZED DATUM REFERENCE FRAME
4.24 DATUM TARGETS
Section 5 Tolerances of Form
5.1 GENERAL
5.2 FORM CONTROL
5.3 SPECIFYING FORM TOLERANCES
5.4 FORM TOLERANCES
5.5 APPLICATION OF FREE- STATE SYMBOL
Section 6 Tolerances of Orientation
6.1 GENERAL
6.2 ORIENTATION CONTROL
6.3 ORIENTATION SYMBOLS
6.4 SPECIFYING ORIENTATION TOLERANCES
6.5 TANGENT PLANE
6.6 ALTERNATIVE PRACTICE
Section 7 Tolerances of Location
7.1 GENERAL
7.2 POSITIONAL TOLERANCING
7.3 POSITIONAL TOLERANCING FUNDAMENTALS: I
7.4 POSITIONAL TOLERANCING FUNDAMENTALS: II
7.5 PATTERN LOCATION
7.6 COAXIAL FEATURE CONTROLS
7.7 TOLERANCING FOR SYMMETRICAL RELATIONSHIPS
Section 8 Tolerances of Profile
8.1 GENERAL
8.2 PROFILE
8.3 TOLERANCE ZONE BOUNDARIES
8.4 PROFILE APPLICATIONS
8.5 MATERIAL CONDITION AND BOUNDARY CONDITION MODIFIERS AS RELATED TO PROFILE CONTROLS
8.6 COMPOSITE PROFILE
8.7 MULTIPLE SINGLE- SEGMENT PROFILE TOLERANCING
8.8 COMBINED CONTROLS
Section 9 Tolerances of Runout
9.1 GENERAL
9.2 RUNOUT
9.3 RUNOUT TOLERANCE
9.4 TYPES OF RUNOUT TOLERANCES
9.5 APPLICATION
9.6 SPECIFICATION
APPENDIX A PRINCIPAL CHANGES AND IMPROVEMENTS
APPENDIX B FORMULAS FOR POSITIONAL TOLERANCING
APPENDIX C FORM, PROPORTION, AND COMPARISON OF SYMBOLS
APPENDIX D FORMER PRACTICES
APPENDIX E DECISION DIAGRAMS FOR GEOMETRIC CONTROL
Index
/
227
您的浏览器不支持PDF文件的浏览，可以通过以下方式继续阅读：
使用手机扫码阅读：
使用制造云客户端
点此下载
使用最新版的Chrome浏览器，360安全浏览器极速模式。
用手机查看
分享
0
0
0
曹迪
详细信息
类目：
标准->ASME标准(ASME)
描述：
上架时间：
关键字：
作者：
0
/150
为该资源评分：
发表评论
全部评论（0）
最近看过
相关推荐
ASME第八卷2015版中文
ASME-Y14.5-2009
ASTM B221-2008
SAE AMS 2772E-2008 铝合金原材料的热处理
用手机看
×
打开微信，扫描以上二维码即可在手机上阅读和分享到朋友圈。
ASME-Y14.5-2009
